[MyPlumbingsupplier]

Sump pumps should have a check valve installed to prevent water from going back into the house. A check valve allows water/waste to flow in one direction only. It sounds like the former owner or who ever installed the unit may have over looked this step. As the previous poster stated, contact your attorney, realtor, inspector and a plumber. Explain the situation to the plumber and ask if the system should have a check valve, if it doesn’t he will need to install one. This problem more then likely existed prior to the sale of the home, if this information wasn’t disclosed then the seller should pay any expenses. You may want to have the plumber make sure you don’t have any substantial water damage if this was an ongoing problem in the past.

Good look and if you need to replace any plumbing fixtures, log on to http://www.HomeCenter.com for discounted prices.

The above information is based on opinion only, always consult with a licensed plumber for plumbing issues.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

SaniFlo up flush toilets are a very affective way to install a toilet in a basement. I personally know two people who have them installed and they work very well. One of the benefits of these units is you don’t have to break the concrete floor to have them install. When you flush the toilet you will hear the macerator run and pump the way away. Other then that, they are relatively silent toilets. You can also install the tank inside the wall by purchasing the extension unit. This will help to reduce any noise. When it comes to ejection pumps, you will always hear them run when they flush.

The above information is based on opinion; please base your purchase on your own research. You can purchase this item through http://www.HomeCenter.com by calling 800-875-7999. They offer discounted prices.

To learn more about these units, please click on:
http://kitchen-bath-pro.blogspot.com/2007/02/basement-toilet-installations-saniflo.html

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Faucets usually leak and wont completely shut off when the valve seat is worn. On older faucets some manufacturers used a compression valve, the more you turn the more you compress the valve and the faucet turns off. Newer faucets come with a ceramic disc valve; this is a much stronger and more affective valve system. If you have an older faucet, it’s not worth trying to repair it since you will ultimately go through the same situation in the future. You may want to consider replacing it with a new unit. Log on to http://www.HomeCenter.com to view a nice selection of faucets. There you will be able to find one that fits your needs.

Replacing a shower faucet is a little more involved then replacing a sink faucet. Consult with a plumbing before removing any components.

The above information is based on opinion, without seeing your faucet it would be hard to accurately diagnose your individual situation.

http://kitchen-bath-pro.blogspot.com/

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Moen and Kohler are both very good faucet manufacturers. They both offer a nice selection of styles that will compliment your kitchen décor. Depending on your particular style and price range I believe you will find something that will fit your needs with either manufacturer. I personally like Kohler products better, my experience with them has been very good, but I wouldn’t discredit Moen products. If you stick with either manufacturer you will get a very good product that should last for a very long time.

Visit http://www.HomeCenter.com for big discounts on these manufacturers as well as others.
If you decide to make a purchase, please ask for me, 800-875-7999.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Hello,

Check out my blog on this topic, it will give you helpful tips on how to replace the item and what parts you will need.

http://kitchen-bath-pro.blogspot.com/2007/07/replacing-toilet-tank-fill-valve.html

You can also purchase this item on http://www.HomeCenter.com or by calling 800-875-7999 and ask for me.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

The best way to proceed is to first ask your contractor what time line he has in mind, this will allow you to make your schedule. If you’re going to purchase the fixtures yourself, you should allow a few weeks for delivery just incase something is back order. I recommend checking out http://www.HomeCenter.com for your fixtures. The prices are very good and so is their inventory. In most cases you will save a lot of money buying the material yourself.

Your contract will:

Gut the bathroom.
Install new rough in valves for faucets.
drywall/green board the walls.
Set tile
Install fixtures

You really want to have the fixtures there before they need them so you don’t hold up your project.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Hello,

You can use granite/marble tile over a cement board, this will give you the over all look you want with out breaking the bank. The big different is you will see some grout lines but it doesn’t look bad at all.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

I recommend you call Mico directly at 888-301-8787; they will be better able to assist you. Generally there shouldn’t be a issue with water pressure on a new install. You can check to see if the supply lines are crimped but other then that call the manufacturer they will help.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

When replacing vinyl flooring in your bathroom with tile, you may need to add a spacer on the drain to accommodate the extra thickness of the new flooring. Depending on the thickness of the new tile and the way the original drain was plumbed in, you can use a PVC Closet Flange Spacer Ring on the drain. This is a very easy install and will cost you under $10.00 to purchase from a local supplier. Remember you will also need a new wax ring and new Johnny bolts to reinstall the toilet.

Check out my blog for more information of this topic as well as other helpful information.
http://kitchen-bath-pro.blogspot.com/

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Although most drains for pedestal sink come from the wall, you may still be able to accomplish your project. It is important however that you find a pedestal sink with an open bottom on the leg. This way the pedestal leg won’t interfere with the drain. I suggest going to your local plumbing showroom and looking at the different sinks on display to see what will work for you. Good luck.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

From time to time you may have to replace the fill valve in your toilet. This is a very easy task and doesn’t require a plumber to be called. You can purchase a fill valve for about $10-$15.00 at any local plumbing supplier. If you follow the direction on the box, you should be able to complete this project in about 15-20 minutes with out breaking a sweat. You’ll need an adjustable wrench and or pliers; everything else is included in the box.

The BRASSCRAFT BCT015H ADJUSTABLE, ANTI-SYPHON TOILET TANK FILL VALVE is a very good product and should work well with most toilets. Remember, always shut off the water before you start any plumbing project.

Check out my blog for other helpful hints and product information.
http://kitchen-bath-pro.blogspot.com/

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Double bowl sink drains can be set up differently depending on the installer. Here is one sample of how it could look. http://images.orgill.com/200×200/3497492.jpg

Although you drain maybe set up slightly different, if the drain line is cleared it should work properly. At one point I’m sure it worked, so you may want to see if there is a clog in one of the lines.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Febco is one of the leading suppliers of back flows in the industry. Although the one you have maybe from another manufacturer you maybe able to find your answer by clicking on the following link http://www.febcoonline.com/products/default.asp?parCat=1134. There is an online company called http://www.HomeCenter.com that carries a large selection of their products as well as other irrigation items. Hope this helped.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

From time to time everyone experiences a clogged toilet in his or her home. We’re all guilty of flushing things that we shouldn’t, and regardless of how much you spend on a toilet it will clog at some point. There are two ways to remedy the situation when it happens, you can opt to call a plumber and pay some ridiculous amount of money for about 10 minutes of work. Or you can fix it yourself. Standard plungers may help to clear the passageway in the toilet, however the most affective way is to snake it. For less then a plumber will charge you, you can purchase a toilet snake (auger) and do it yourself. If the situation happens again, you will be fully prepared to tackle the job since you have your trusty auger in the shed/garage already.

They’re very simple to use and the whole project will take less then ten minutes with the clean up. An auger not only clears the blockage in your toilet but it goes beyond the blockage and potentially clears anything else in the line.

The expense in minimal and it’s a great addition to your toolbox. And if a neighbor or family member needs to use it, you can always charge them for your services.

Check out my blog on this very subject, I think you will find it very informative.

http://kitchen-bath-pro.blogspot.com/2007/07/unclogging-toilet.html

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[MyPlumbingsupplier]

Hello,

Tackiness shouldn’t be a consideration in your plan. If raising the vanity height is going to be more comfortable for you, then I say go for it. You may have to purchase longer supply lines and a new drainpipe, which is relatively inexpensive ($25.00). As for the new 4” space you have created you can either tile that area with matching floor tile or purchase rubber molding in the same color as the tile, vanity or paint in the room. The rubber molding is the material they use in some kitchens or offices. It comes in a roll and is either self-adhering or you may have to use contact cement. This is a quick and easy fix, just don’t raise it to high, the average vanity with counter top height is about 34” from the floor.

Dominic Anfossi
Visit http://www.MyPlumbingSupplier.com for more tips and product information.

[Author]

Posts