Forum Replies Created
-
AuthorPosts
-
jfh1967Participant
I aggree with policydoctor1. Bur buy good quality ball valve 1/2 x 3/8″ (Dahl) and flexible supply tubing.
jfh1967ParticipantAsk to your contractor, how he does his job. The preparation is the key. The tub must be sand and cleaned with tsp. There must be no dust.
I did it in an appartment 2 years ago and the tub is still in very good shape.
We must keep old cast iron thub. They are better than steel thub.
J-F H
Quebecjfh1967ParticipantThe most important thing is préparation. Clean your thub whit tsp and sand it.
jfh1967ParticipantFoam is wather proof. But you can add an aluminium vapor barrier to keep heat inside.
Put a 2 in foam.jfh1967ParticipantIf it is a cast iron, use a sledge hammer. But first cover it whit a scrap cloth.
jfh1967ParticipantIf your wather heater is almost 10 years old, you should replace it.
jfh1967ParticipantNothing else than a brush. The same one that we use to clean a bottle.
jfh1967ParticipantOn the market, there is a product called poly prep, alkyd base. It preps the slipping surfaces. Open the window !! Do you want to get my bathroom pink ceramic ???
jfh1967ParticipantYour studs must be drying. Dis you ad some studs ? If yes, it’s normal and your situation will get normal in a few months.
jfh1967Participantis it chrome, or pvc ? is the clog inside the wall ?
jfh1967ParticipantPut a coat of latex primer and 2 coats of finish.
jfh1967ParticipantWhat do you mean exactly ? Annual maintenance ?
jfh1967ParticipantWich of these you used ? How long and how many ?
jfh1967ParticipantHe’s right. thats not an esay job. But it’s ok to make a tranch and put a pvc pipe of 1″ tu run the cable. Call a contractor for the remaining job. A real one. Not a fly by night !
J-F Hjfh1967ParticipantAfter the dark all the wasp are inside the nest. bring a flashlight with you and take youre time to find the entrance.D’ont worry, the activity will be low. When you got it, fill up the nest with your sray.
Good luck !
J-F H
Québec city -
AuthorPosts