Forum Replies Created
-
AuthorPosts
-
WhiteFeather700Participant
Try the instructions on this web page.
http://www.sanyo.com/entertainment/remotes/2000moonlight_program.html?showfileid=479&productid=296
If that doesnt help let me know and I will see if i can find out more for you.WhiteFeather700ParticipantThe channel switch is on the back near the cable connector. I’m sorry to say I cant find much on your tv. Last time I looked up a rca tv and found all kinds of info.
Wish I could help you moreWhiteFeather700ParticipantPhilips says to adjust the tracking and to try cleaning the heads. Also they said to make sure to use a known good tape.
Some thing else you could check is to make sure the channel switch is set right (channel 3 or 4), that could have gotten bumped when you moved it. Also since you moved it have you reset all the channels in it.
Is this a 13 inch tv/vcr combo?WhiteFeather700ParticipantIt sounds like a wire may have come lose (assumeing you mean the vcr is built into the tv). You could just have a lose wire inside or whats called a cold solder joint. Cold solder joints are very common. If you know how to solder it would be very easy to check for the cold solder joint, just look for a solder joint that is dull and then retouch it. If you can give me the manufacture and model I will see if i can find more for you. For now just make sure all your connections are tight and try the tracking on your vcr. The blue screen will only appear when the screen is full of static.
-
AuthorPosts