Forum Replies Created
-
AuthorPosts
-
countrybrendaParticipant
I would just have the ducts replaced the flex duct is much easier to work, on the air return I think it is how far the air has to travel from point a to b. On our house the further away the room is from the less air flow we get.
countrybrendaParticipantbrand and model number
countrybrendaParticipantAre both of the lighting fixtures new?
can you describe the ordor, I would be concerned if it smells like something burning.countrybrendaParticipantOn the motion sensor see if these are some adjustment indicator on the bottom or on the front panel. Ours indicates dusk/dawn on the garage door openers try this link if you know the model number http://help.chamberlain.com/help/en-us/landingSummary.htm
countrybrendaParticipantCan go here for information http://www.appliance411.com/parts/search/ in order for user to assist need model number
countrybrendaParticipantInformation and how to repair techniques are listed towards the bottom of the link
countrybrendaParticipantThis link has quite a few sorry could not respond with only 1 or 2 comments since was not sure what kind of frame was being used.
countrybrendaParticipantevidently there is a product based on link provided that can do the repair I am assuming that you could get it at a craft or fabric store it is call heat n bond
countrybrendaParticipantif there is water actually in the line your ice maker maybe turned off Maybe the ice maker is turned off. Look for the thin, coat-hanger-like metal bar on the right side of your ice maker. When this bar is up, the ice maker is off. When the bar is down, the ice maker is on.
During normal ice maker operation, the bar is up (the ice maker turns off) The bar comes down (the ice maker turns on) when all the ice has been dropped. See our “Troubleshooting Guide” section for more details.
If the bar is up, gently lower it to begin making more ice.
countrybrendaParticipantwas not sure what kind of switches your are referring to FYI there is also wiring that is called this
XXXXXXXX Set the acceleration time SPT1:PP:TTTT xxxx:CPT1:PP:TTTT …
TTTT Set the deceleration time SPT2:PP:TTTT …
http://www.metronix.de/mtx/products/stdattcountrybrendaParticipantsorry I am stumped one last question did you remove that aerator that the water comes out of maybe it is clogged, not sure if this matter but are the hoses connected hot to hot side of sink and cold to cold side of sink
countrybrendaParticipantsorry but I just have to ask, sometimes it is a simple solution, did you remember to turn the water valves back on
countrybrendaParticipantgo to Freeplans.com do the survey and they will send you the information
countrybrendaParticipantif I remember right it is width x lenght= times 0.9144
countrybrendaParticipantif you have a constant water in your yard I would think that you have a leak in your water pipes. If the yard is already wet and then it rains how is it suppose to dry up. As far as drying your yard mother nature can take care of that.
-
AuthorPosts