Kenmore110.20912990 Won’t Drain

[JahSpecs]

My Kenmore 110.20912990 will not drain. I unplugged it and removed a sock from the water pump. However when I tried running it again it still won’t drain. The lid switch is working, it is spinning, the motor is making the loud clicks. The drain hose is clear and had some water in it. The water pump is filled with water and I don’t think there is anything else clogging it. The hose from the drum is clear. Your help is greatly appreciated.

[DanO]

Was the pump removed from the motor and if so, was it reinstalled properly and still on the motor shaft?

If that’s not the problem the pump may have been damaged in the process and need to be replaced. If there is nothing clogging its hoses and is being turned by the motor, I can’t think of any other possible cause.

– Kenmore 110.20912990 Washer Pump
LINK > http://www.appliance411.com/data.php?ap=AP2907492

JMO

Dan O.
http://www.Appliance411.com/parts/?ref411=Kenmore+Washer
The Appliance Information Site
=D~~~~~~

[Author]

Posts