Viewing 1 reply thread
  • Author
    Posts
    • #75652
      jwil989
      Participant

      My older model Kenmore built-in double oven began beeping and blinking “F1”. I now have to shut off the power till I want to use the oven.

      What is this and how do I stop it..?? I don’t have a manual. The only number I can find is on the side of the door and is not designated as a Model#. It is 326B1016P001.

    • #306987
      DanO
      Participant

      ** older model Kenmore built-in double oven. The only number I can find is on the side of the door and is not designated as a Model#. It is 326B1016P001. **

      This is likely the part number of the piece of paper you were looking at. We need the appliance’s actual model number to look up what appliance design you’re dealing with.

      You can find tips for locating the model and serial number identification tag on your appliances at the following link:

      – Model Number Tag Location Guide
      LINK > http://www.appliance411.com/parts/tagsearch.cgi

      ** began beeping and blinking “F1” **

      On many range models that indicates a problem in the electronic control itself but could be caused by other problems depending on the actual model number of the appliance and whom made it for Sears.

      JMO

      Dan O.
      http://www.Appliance411.com/parts/?ref411=Kenmore+Oven
      The Appliance Information Site
      =D~~~~~~

Viewing 1 reply thread
  • You must be logged in to reply to this topic.