How to build a Bathtub Return Panel

[KarlTB]

My bathtub is open on two sides (the long side and the short side opposite the faucets. I would like to install a bathtub/shower glass door on my tub but because it’s open like that I would have to get it custom made which would cost about $900. I would like to know how to build a return panel – basically a glass framed wall to put on the short side of the tub. Then I could install the readily available shower doors on the long side of my tub.

[Anonymous]

Building a 2 x 4 wall would probably be the most reasonable. You could make a glass block end wall but they are more difficult to get installed so they seal and you don’t want to knock the wall down when your kid slams the door open.

[Author]

Posts