You said:
My bathroom is wired through one GFCI. The GFCI plug is working but the other plugs are only reading 80 volts.
* I assume that:
* You measured 120 volts at line side of GFCI.
* You measured 120 volts at LOAD side of GFCI.
* Assuming that is the case then the cable going from the GFCI to The first plug is measuring 80 volts?
* If that’s the case, then the cable at the GFCI is not making good contact or the cable at the first plug is not making good contact.
* God luck… Adios… Jasper..
Was the GFCI just installed, or has it been in place for some time, and just now the problem has started? If you just installed it and it doesn’t work right, then go back through all your wiring and double-check for proper installation and good firm connections. If this is an old installation with a new problem, I would suspect the the GFCI needs to be replaced.
.
