cutting inside corners cove molding

[jklatte]

I’m installing new cove molding and the old molding has a wierd cut in it. How do I cut inside corners for a ceiling

[carl21l]

you could watch ask this old house where this issue was aaddressed :o)

to cope the corner, install one piece into the corner. hold the second piece in place with the end butting to the installed piece. use a compass to scribe the contour of the installed piece on the end of the other. now use a coping saw to cut along the scribed line, cutting with a slight bevel toward the rear of the molding. With luck you will get a good fit on the first attempt.

good luck

Carl

[Author]

Posts