Okay, here is the problem.
1) I am replacing the fan switch (3 speed – 4 wire)on a ceiling fan light.
2) I had removed the black wire connection, then the gray wire connection, and replaced the other two no problem, yet.
3) I discovered there are 2 gray wires to connect to the switch. I don’t remember 2 when I took it off. One gray wire goes up into the lamp, the other into the side of a little box in the inside of the fan where other colored wires are connected.
4) I am sure there where no wires that where not connected.
5) I am sure it doesn’t connect to the other 3 wires.
6) I don’t want to cause an electricla fire!
Especially since the spouse is away this weekend.
Oh the woes of a weekend handyman.
thanks,
buster