Tommy Mac Discussions › Forums › Fix-it Forum: Home Improvement & Do It Yourself Repair Forum › cutting inside corners cove molding › cope cut molding
August 27, 2004 at 6:18 pm
#250642
carl21l
Participant
you could watch ask this old house where this issue was aaddressed :o)
to cope the corner, install one piece into the corner. hold the second piece in place with the end butting to the installed piece. use a compass to scribe the contour of the installed piece on the end of the other. now use a coping saw to cut along the scribed line, cutting with a slight bevel toward the rear of the molding. With luck you will get a good fit on the first attempt.
good luck
Carl