Tommy Mac Discussions › Forums › Fix-it Forum: Home Improvement & Do It Yourself Repair Forum › Repair Refridgerator Door

  • This topic is empty.
Viewing 2 reply threads
  • Author
    Posts
    • April 30, 2004 at 7:51 am #43552
      Billy Bell
      Guest

      SEEKING ADVICE ON HOW TO REPAIR STRIP AND REPLACE THE CAM IN A SIDE BY SIDE REFRIDGERATOR. PLEASE HELP

    • May 2, 2004 at 2:10 pm #232809
      chris
      Guest

      if it is a General Electric the door cam is easy just take hinge off and replac. if by strip u mean gasket just loosen 1/4″ screws underneath and reseat untorn gasket. if torn cut plastic section ( but not magnet) out and get a piece from a used appliance store. just slide plastice piece in with magnet and tighten screws

    • May 2, 2004 at 2:11 pm #232810
      chris
      Guest

      if it is a General Electric the door cam is easy just take hinge off and replac. if by strip u mean gasket just loosen 1/4″ screws underneath and reseat untorn gasket. if torn cut plastic section ( but not magnet) out and get a piece from a used appliance store. just slide plastice piece in with magnet and tighten screws

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.