Problem mounting a corner shelf… Need a suggestion.

[Unregistered-tman95]

I am trying to mount a decrative corner shelf in one of my bathrooms, but have a minor problem. The shelves are wood and have decrative metal supports with mounting holes that cannot be changed. When I drilled the hole in the 1/2″ drywall I hit the metal ductwork. I didn’t go through it, but I’m wondering what kind of anchor or molly I can use without going into the duct yet still provide a reasonable amount of support for the shelf.

Any suggestions would be greatly appreciated.

[Unregistered-Dodgeman]

I ASSUME the metal duct is for heating hot air or cold air return.
IF this is the case, I would drill through the metal and use the correct size sheet metal screw to fasten it. The screw will seal the hole to prevent any significant air leak.
Good Luck!
Dodgeman

[Author]

Posts