Part s for Old (very) Craftsman Power Tools

[Charlie Nichols]

I’m looking for a source of parts for old Craftsman power tools. In particular I need a “driven” sheave for an old bench drill press. This is probably a 1940’s or 1950’s vintage tool. The model numbers are no longer listed in the local parts store database. It has a “dunlap” motor – don’t know how long ago these motors were used….Also need a tailstock for an old craftsman lathe. I pick up old tools from time to time and would love to find a source for parts. Seems like I’d seen an ad for someone that sold “new-old-stock” parts….can;t recall where…..Help anyone? Thanks, Charlie

[Bob]

Looking for parts for a table saw Model # 113.27521

[rodney carlson]

looking for motor 2.75 hp. model # 113.197150

[Ken L Ryals]

AMT no longer manfactures small wood working
equipment. Would like to find out if another
company is manfacturing parts for the AMT wood lathe.
I need the head stock and also Tool rest for my
wood lathe. Any information would be appreciated.
Please contact me by e-mail. Thanks.

[Hugh Wilkinson]

Where can I get a switich for this saw?

Model # 315.27782

[darren stoltzfus]

need it, where can i get it

[robert dunlap]

old craftman lathe

old craftsman scroll saw

old dunlap bansaw

please call with inquiries 1-937-864-1661

[Alan Hills]

Anybody know where I might get a switch for a Craftsman model 31517280 scroll saw?

[george agnew]

I am looking for the knob that fits on top of the housing directly over the rod that moves up and down to work the blade. The saw looks like it has a screw thread where the knob would fit on to. Any help would be greatly appreciated.

My tel number is 860 687 7902. Thank you very much.

[Jim Soltau]

This is an old saw but work well,this casting needs to be replaced as it split between the bolts and is hard to keep the table level to make a square cut. If we can’t find the part maybe I can try and machine one myself. Hope you can help me.

Jim

[Robert Puetz]

Please e-mail me if you have saw/ saw parts

[Richard.Oliver]

I am looking for any information on a Craftsman/King Seeley Band Saw Model # 103.24300 3 Weel.

[Ronnie Church]

I have an old saw that my grandfather had, It’s in a metal case looks to be dark green with a chrome circular saw inside and yes it works also.

Can you give me an idea of how old and a dollar amount.

[Elvis Marcrum]

I have aquired an antique craftsman power hand (Circular) saw of unknown vintage.A label on it says 6 1/2″ Electric Hand saw model 207.25530, aluminum casing extremly heavy! Works great thick white cord.. I want to buy a new lighter weight saw..Anyone have any ideal what this saw is worth? I am 46 years old and have not seen one like this in my lifetime.

[kevin moffett]

i am looking for a manual for a planner that is about 10 years old … also need one for a 15 speed drillpress about the same age thanks for any help.

[Fred Olko]

I have an old Craftman Metal Lathe probably from the 50s or 60s.

I am looking for an owner’s manual for it.

[Mark Zemanek]

I’m looking for a Craftsman metal lathe from the 1930’s thru the 1970’s, either a 6×12 or 6×18 model.

Thanks,

Mark

[Barry Travis]

Looking for the small and large tool rest, and they block they sit in.

[rodney schield]

I would like to find out what year the saw is .I

need some photos or a website to go to. mom said

“saw her great grandfather using it to make

screendoors in 1939″. It has a big brush type

motor,beltdriven ,gear driven blade hieght

adjustment assy,the table tilts for bevel cuts.

has wood side tables[not original?]gear driven

mitergauge.only#’s are a pat #on the side of

the blade adjustment assy. Iwould greatly apreciate any info as i am in need of a new shaft

and bearings

[Stefani M]

I found this Craftsman set at an Estate sale. The product number is #5541. Does anyone know how old this set is?

[Stefani M]

I found this Craftsman set at an Estate sale. The product number is #5541. Does anyone know how old this set is?

[Allen Bird]

This saw is about 1975 vintage. The motor armature is bent. I am looking for an armature or motor.

[bill gossett]

trying to date and find any info on large Craftsman jig saw at least 24 inch arm.Suspect 1930s vintage

[Scott]

I have a Sabre saw i got from my dad years and years ago.The model number is 315-27730.I cant find any anywhere that look like this.It still has everything original on it and works wonderfully.Just curious.

[mike halloran]

I’m looking for cast iron table saw extentions for a 10 inch craftsman table saw . thanks

[Bob Stone]

I need an off/on switch for a Craftsman 80 elect. drill. Mod 315.7730

[Michael Johnson]

Im lookin to get rid of this very old hedge trimmer attachment that I have, it looks to be pretty new in looks, but it is very old, i cant find a date on it anywhere, it has the instructions and the box is in tact…..email me if u are interested

[ed comparon]

need manual and drive belt cover for this floor mounted scrollsaw; and it is available.

[Alex]

Was patented June 21, 1938, my grandfather got it around 1940 (some guy didn’t have any money to pay him with, he went on to build two houses). Just wondering if anyone knows where I could get a manual, and replacement gears for the saw. It’s still running on the original Sears Craftsman motor too! Thanks, any help would be appreciated.

[Murph]

inherited old (1985 ?) saw 7 1/2 in. blade radial arm Blade guard and springs and lever broken and/or missing Sears, Craftsman no help parts unavailable. need to find parts or loaction of someone who can replace parts or repair saw.

[Brian Borich]

Looking for brushes, brush cap and switch for 40’s or 50’s model number 315.2577A. Also, any information ecpecially an exploded diagram and parts list would be great. Thanks Brian

PS this was my father’s drill so I’d like to fix it up nice!

[Ed Herman]

Model 315.26750

Looking for someone who might have the armature for this saw laying around in a junk heap.

[James Melby]

Looking for parts for an old electric 1/2″ drill (Craftsman) Model number 107.259

[James Melby]

Looking for parts for an old electric 1/2″ drill (Craftsman) Model number 107.25960

[randy risner]

i have a older jigsaw all metal that i let some one borrow when it came back the bottm plate was bent. where can you get parts? thanks randy

[ernest wheeler]

i’m not sure what the part is but was told it was a speed reducer I have the model # it is 665.256560 it has sears and roebuck and co. stamped on it. i would like to know when it was made if possible.

[Brian]

I have an Old craftsman bench top jointer 4″ i need to find a set of brass bushings for it. The jointer has a Craftsman name plate but doesnt have a model number. I have pictures of it that can be e-mailed. Anyone that may have an idea where i could find these bushings please advise me . Ive been to 2 sears places that supposedly can get parts and one i showed them the jointer and they still said they cant help me. My dad had this and it kind of has a sentimental value . Thank you

[moz]

hello, I just stopped by your web site, I have my fathers old 12 inch worm drive skilsaw , it is in very good shape in a carring case too , what could it be worth today? thank you.

[Perry Carlilse]

I am looking for a replacement Ideller pully for a 6” by 48” belt sander, it a craftsman, but I don’t know the model #. The one we have is worn to the point the bearings fall out, and the belt runs all over.

[J. Perham]

Hello all. I recently inherited a table saw, and I can seem to find any information on it. ( Value – parts) These are the specs: Craftsman Model 113.19051 Style 177 – 3/4 hp / 3450 rpm / 60 cycle / 1 phase / 115v – 8 amp / This is an older table saw – with stand weighs about 300 lbs. Any info is appreciated, Im in the NYC area. Thanks, Jim

[Matt]

Does anyone have or know where I could get a countershaft pulley (9-427).

[Glenn Race]

I am looking for any screen to fit this. I have been all over the web trying to find one with no luck. Does any one have any suggestions as to where I might find one?

[Kevin Trent]

I’m looking for some parts to a model 103.23070 lathe 9 inch swing, 30″ between centers. I’m looking for part #24104, CUP CENTER WITH POINT, #24215 TOOL REST 10323070,and # 24413 HEADSTOCK COVER. Does anyone know where I can find these parts?

[Craig]

Hi. Looking for the fence and misc. related knobs for a mid 60’s Craftsman Jointer. Anyone have any ideas? Thanks!

[bob]

i have an old craftsman hand power saw model # 207.25603 or 20725603 i`d like to find out about any replyswould be great thx

[Joe]

I have aquired craftsman lathe Model # 109.0702

It looks like it was made between 1941 and 1948. Looking for information and tooling for it. Can anybody help?

[Ismael Rojas]

Sears Model # 315.10514 My variable speed reversible switch is damaged,and need to know where to find a new or used switch. A place out here in california. Thank You.

[Ismael Rojas]

Sears Model # 315.10514 My variable speed reversible switch (trigger) is damaged,and need to know where to find a new or used switch. A place out here in california. Thank You.

[Denny Wilkerson]

Recently aquired the above band saw, minus miter gauge and fence. This saw is new and never been used, however it’s (4 yr?) old. I would like to obtain the fence designed for this (swing-head) band saw w/large stationery work top. The manual did not speciify any addiitional accessory items and the personel at Sears did not seem interested in my request, only to suggest that I purchase a universal fence, that was not to my liking.

Can you please be of help.

[MARK RIDDLE]

I need the variable speed switch for a model 315.1728 auto scoller jig saw

[Rob Mckay]

Seems that old Sears switches are a weak point in design. I see that a lot of people are requesting that part. I need a switch for a 3/8″ Hand Drill model 315.7740 and an Electric Hand Saw model 336.27963 (date 12-60). Does anyone know of a source????

[don pierce]

any ideas about age and value? cord is bad but rest is in excellent condition. thanks, don. will sell with good offer

[Mancel Tompkins]

I’am looking for a duplicator attachment for the above lathe. I would appreciate any help received in locating one of them.

Thankyou for your help and time.

Mancel Tompkins

[pat healey]

need owners manual for Sears Craftsman table saw 103.23420

I have a miter and most of a fence(needs knobs)

[MGDAVIDSON]

I have inherited my Dad’s old Craftsman 6″jointer. I would like to add it to my shop but am having trouble truing it up. I am looking for a manual for a Craftsman 6″ Jointer, model 103.23900. I have no idea of what year it would have been manufactured. Thanks

[Ron Taylor]

I looking for parts and/or accessories for a craftsman metal lathe model 101.07301. This is a 6″ lathe made by Atlas for Sears to sell under their Craftsman name. I really need a new crossfeed ball crank handle and a tailstock ram locking lever. Any accessories or tooling would be considered as well.

Regards,

Ron Taylor

Houston, Texas

rtaylor@morandirect.com

[Ramesh Veerasurla]

I buy a lot of craftsman tools ,I lost the instruction manual for 5200 model skilsaw. I appreciate iff you can send me the required information

Thanks,

Ramesh

[Juan Castaneda]

Could please help me locate a parts list for hand drill Model 315.25063

[Bob Zimny]

8 or8-1/4″Craftsman model # 115.7429. Need help identifying exact year and locating owner’s manual

[Larry Grossman]

I’m looking for a replacement pulley for a 20 year old 15 1/2 drill press. Can anyone HELP!

[Larry Grossman]

I’m looking for a replacement pulley for a 20 year old Sears Craftsman 15 1/2 drill press. Can anyone HELP!

[Dennis]

Yes I have a crafstman power saw model 315.27910

And I am looking for the brushes, springs, and retainers for the saw.

[Ralph]

I need a on / off switch for a craftsmen router. The router model # is, 315.17350. The switch part # is 2-617825-03.

[Larry Silberman]

I would like to get an owners manual(part#31949) for this saw, so that I might care for it better.

thanks Larry

[hans nelsen]

I am looking for the blade assemblies for this old power planer or one or two olds ones to use for parts.

[John S. Bowie]

I have a Craftsman Table Saw, Model 113.22161 and a Craftsman Hand Sander, Model 315.11640, and no owners manual for either. I would like to locate them on the internet for Download in Adobe Acrobat.

[Eldon Wortman]

I am trying to locate a trigger switch for a 1/2 inch drill, Model No. 315.10290. Sears no longer stocks it. Another possibility would be if the switch is interchangable with a different model.

[Eldon Wortman]

I am trying to locate a trigger switch for a 1/2 inch drill, Model No. 315.10290. Sears no longer stocks it. Another possibility would be if the switch is interchangable with a different model.

[Ron Kocian]

I am looking for a handle for this saw.

[Andy Allison]

A friend of mine needs replacement cutter blades for a Craftsman Power Planer Model 315 25000. Same as Porter-Cable Model 167 Power Block Plane. I tried but got lost. Any ideas? Please e-mail me if anyone has a suggestion! Thanks!

[Dan Wassenar]

I am looking for information (age and approximate value) on a recently acquired Craftsman Planer attachment Model No. 605.26320. The Planer is in excellent condition with the box and Assembling Instructions and Parts List.

[Reid]

model#13-22541 Code#D68 Craftsman-Simpson SearsLTD. I’m looking for traking help and imfo on this tool. Number on Castiron is 47216-103.Thanks for the help,it’s my dads.

[Jason Foster]

I am looking for the fence slide and a couple of other various parts for a planer/joiner. I think it is a 1950 something model. Can anybody help?

[J.D. Clark]

I’m in need of help to find info, parts, manual for this old dinosaur; SKF ball bearing, w/A.C. motor 315.5608(6608?). I’ll greatly appreciate any expedited info on this band saw. Thank you all very much.

[Marvin]

Would like a 3″ 3 jaw chuck for my lathe. Does anyone have one for sale in need 1/2″ X 20 thread. thanks

[Mike Cain]

I need a owners manual, service manual for a Craftsman 12″ Radial Arm Saw circa approx 1980 if someone has one could you please send me the model and serial number any number which may have been on the base is gone and I have a motor number 63791. thank you.

[RONALD AJAY NARAYAN]

I just bought a used 12 inch craftsman bench saw and the blade does not come 90 degree to the table.if you know how to adjust please help me.

thank you

[Bill Roberts]

Recently I came across a Cratfsman saw model # 103.02041. I am looking for information on it, such as when it was made, etc. Any ideas?

[Ray]

I need an armature assembly for router model #315.17381 part #2-606492-01

[larry boyd]

need parts for 5hp 22gal craftman ser. no.919.165220

[Glenn]

Someone gave me a Sears model # 244.21044 analyzer and I am looking for a manual for it. Can anyone help?

[Charles Franklin]

Looking for a drive pully for model 31511721 sander

[Charles Franklin]

Looking for a drive pully for a model #31511721 sander

[D Hoopes]

I am looking for manuals for a Model 113.22411 10″ table saw and Model 103.23920 shafer. Any info would be appreciated

[Duke Barron]

I have an old Craftsman dremel model# 117-2102 S#113460c. I would like any info I can get on it. Its in the org box and has a few parts and it works. Looking at the shape it is in it was not used a lot.

I have pic of it in a zip file if you would like to see.

Thanks

[Ernie KAUFFMAN]

Need copy of manual. Needed to set-up saw.

[Chris]

Hello,

I have recently purchase an old Craftsman bench belt/disc sander… 36 x 4 belt and 8″ disc. the model number is 103.0801 parts are no longer available for this model unless you have some! Please let me know if you know of anyone that may have parts for one of these sander…. more importantly is the free roller for the belt… that is all I need. 4 inches wide.

thanks,

chris

[J.Shepherd]

Looking for a chute deflector bolt for a sears craftsman 9HP chipper/shredder / model# 247795890

[Pat Palumbo]

I inherited this old radial arm saw and I need the operating manual. Thanks in advance.

[Antrim Smith]

Need owners manual for Craftsman 10″ Electronic Radial Saw; Model Number 113.190600

[Darrell Lee]

Need parts for this arc welder.

Thank you.

[george kann]

Need a “control gear” for a Craftsman model 103.20001 bench saw. Part #53416

[Ken Collins]

I was given this tool to place in the old tool display in the shop. Can some one tell me when it was made and anyother information you might have about this tool.

[Ken Collins]

I was given this tool to place in the old tool display in the shop. Can some one tell me when it was made and anyother information you might have about this tool.

Can you also share with me other web sites for search of other power tools? I also have a Gustafson and Scott 10″ Table saw #2374 I would like information on.

[Richard Cary]

Need a working chuck for a Dunlap drill press. I believe it was manufactured by Atlas and may be their Model 42.

[Roger]

I found a great older Craftsman 10″ table saw at a yard sale that has had very little use but it is missing the rip fence. Can anybody help???

Any out there that are reasonable replacements?

[patricia hamrick]

I have a vintage 1954 Sears Craftsman 7.0 amp 6 1/2″ electric hand saw. This is in a metal case with the grease tube that has never been opened also directions and all I am wondering if anyone would know what the value maybe.

[Clifford Monges]

I was recently given this lathe, and I dont know anything about it. How old is it ,what is it worth, and what size motor do I need for it.

I would appreciate any info, especially a source for a manual!

[Peter J]

Looking for Manual,Parts or information on this recently acquired table saw.

[Jack James]

Key & Manual

[Marlin]

I need a replacement for blade #4679R (The upper one). Sears no longer carries them.

[richard wigginton]

looking for old 12″ craftmans radial arm saw parts model # 11329501

[Carl Taylor]

Ineed a switch for a Craftsman Model(103.2931) Radial Arm Saw, Part #(B-6388). If anyone can give me information as to where this can be located I will certainly appreciate their help.

Carl Taylor

Box 133

Tuxedo N.C. 28784

[Carl Taylor]

Ineed a switch for a Craftsman Model(103.2931) Radial Arm Saw, Part #(B-6388). If anyone can give me information as to where this can be located I will certainly appreciate their help.

Carl Taylor Email thetaylors@brinet.com

Box 133

Tuxedo N.C. 28784

[John H. Calvert]

need radial arm switch for model#113-29003, If you can help please reply.

[c taylor]

would like to know where i could find blades for this saw. sears mod. # F1012295

[Gordon Bouren]

Looking for owners manual for this table saw. Model 11329730. Can anyone help me.

[Tammy]

I am looking for an owner’s manual for Craftsman pad sander model 315.11650. I would like to find a source online that can be downloaded. Thanks for your help!

[Allan Wong]

I am looking for a coil to the outboard motor, the part number is 712475. Sear does not make the part anymore. Any help will be appreciated.

[Howard Hinkel]

I am looking for a on and off switch for Craftman Band Saw Model 113.24290. The switch has no number on it but it says it is a Mcgill.

[Howard Hinkel]

I am looking for a Operators Manual for a Craftman Band Saw Model 113.24290.

[Doug Anderson]

I have obtained a very old cast iron Craftsman Pipe Cutting equipment P/N 108 1502. It could be a table top unit mounted to an stand someone built for it.

It is an electric unit with a fly wheel type action where the hack saw blade runs back and forth and the weight of the head keeps pressure on the saw movement.

There is a cast iron bar or bracket with a thumb screw that attaches to the end of the weighted head with a single screw that is used hold and tighten the saw blade by turning the thumb screw.

The cast iron bar has broken and I’m looking for a replacement part and/or an owners manual for this equipment.

[Jim]

looking for a place to find the age of my saw. It doesn’t have a normal model #110:24560 7 55

them are the only numbers it has, and can not find any one who even has parts for it.

[Daniel Johnson]

I have aquired an old craftsman varible speed drill the first number of the model number is missing but the rest is 15.11030 and another number on the drill is 6518. I would like to know if some one can tell me about how old this drill is. It is made of metal not plastic and the varible speed button in on the back of the drill above the hand grip.

[Hal Kiltz]

Ineed to locate a fence slide gear rack for my 10 inch bench saw. It is a craftsman 100 model 113.29991 part number is 6305

[Tim J. Dix]

Looking for a replacement motor for a Sears Craftsman Ball Bearing Motor Part # 63870; Motor Model C48BXFD-250; 120/240 Volts; 11.0/5.5 AMPS; 3450 R>P>M; 60 Hz; 1 Phase

[Tim J. Dix]

Looking for a replacement motor for a Sears Craftsman Ball Bearing Motor Part # 63870; Motor Model C48BXFD-250; 120/240 Volts; 11.0/5.5 AMPS; 3450 R.P.M.; 60 Hz; 1 Phase

[rbrutt]

is it an antique worth money?

[rbrutt]

is it an antique worth money?

[Richard Smith]

I need the fence and the guide for my bench saw.I have part of the Model# 113.1 171 also need a handle for the leveler.

[Steve Friedman]

Looking for the Spring Loaded Recoil Knob that returns the press to the up position.

[Ted Galbraith]

I need an owners manual for the Craftsman router, Model#315.1749.

Thanks

[Ron Taylor]

I’m looking for a crossfeed ball crank handle and a tailstock ram locking level for a Craftsman 6″ metal lathe model 101.07301. These were manufactured by Atlas for Sears under the Craftsman name. Also any accessories for this model would be considered as well.

Ron Taylor

Houston, Texas

rtaylor@morandirect.com

[Bob Rokes]

Looking for information on age and value of torch model 628.94290, and cutting tip model 628.58480.

[Sheryl Ryan]

I am searching for a belt for my father’s planer. I hate to throw it out. Any ideas???

Model #755000A

[Kevin]

Need parts for end of pump. Motor is great. Need to find someone with pump parts they would like to sell me. Thanks

[ron mcneil]

need owners manual for craftsman accra-arm radialo arm saw

[Ron Mcneil]

need owners manual for accra-arm radial arm saw mod. # 113.29401

[Ron Mcneil]

need owners manual for accra-arm radial arm saw mod. # 113.29401

[Frank Smith]

PLEASE HELP

[Ed Swiderski]

I can’t help with the vintage stuff, but http://www.searspartsdirect.com had a replacement switch and cord for my 15-20 year old drill for less than $20. Considering that you usually get gouged on parts and given the age, I’d say that’s a fair deal.

[KEVIN]

CAN ANYONE TELL ME HOW OLD THIS SAW IS? I HAVE AQUIRED THIS SAW FROM MY GRANDFATHER’S ESTATE. I WAS WONDERING OF IT’S VALUE AND THE AVAILABILITY OF PARTS.

[MIKE]

I’m looking the shaft in the upper arm that disengages and allows the arm to swing left to right, also looking for the elevation crank handle.

I will pay top dollar, the saw I have was handed down to me by my father and I just can’t bare to junk it!

Someone must know something!

[Lloyd Franz]

4″ belt sander 2 speed model 532F 120 volt approx. 35 years old.

Are parts still available?

I need – drive belt, the two needle bearings, and the bull gear for the belt drive spindle.

[Benny]

i have a Sear’s 2HP. Air Compressor the pressure switch went out i was told by a sear’s Rep.that Sear’s no longer stocks this part part Number

CAC-462 Cut in Pressure 80 Psig Cut Out Pressure

100 Psig i am not having any luck finding part

Thank’s

[Jim D Wight]

I need the(Change gear Bracket L3-58M ) ALSO OTHER PARTS IF THE PRICE IS RIGHT

THANKS Jim Wight

[Lindsay DeCoste]

I need an owners manual for model # 113.242820 and manual for drive motor #113.12270. I would appreciate any help. Thanks.

[Mike]

Looking for an owners manual for a Sears 115 volt 50 amp Combination Arc Welder & Carbon Arc Torch, model # 934.20175 I have tried to obtain an owners manual (part #812-053-000) through Sears, but they are no longer available, any help would be greatly appreciated.

Thanks Mike

[Ron Smit]

I’m looking for info how to use the Sears tune-up analyzer for a friend , it is an older model # 45316 it has one knob for 6 positions hi tach/lo tach/dwell/hi volts/lo volts/points.and a switch for 6 and 8 cyl.

the unit has two wires a black and a red. thanks for your response Ron.

[howard moore]

looking for owners manual for model#11329970.

[mark tresch]

Looking for parts for this model saw. Ant help greatly appreciated

[Dewey Burke]

I need a set of the type of casters that were put on nearly every craftsman tablesaw and radial arm saw ever sold by Sears. Someone must know where they can be found.

[James Loudenback]

The chuck falls off the shaft. Does anybody know how this problem is resolved?

[Andy Graybeal]

for Craftsman “Bushwacker” 18″ hedge trimmer model #315/81822 which is no longer in production.

[Vern Buttenob]

I need one cutter blade wedge for a Craftman

Extention Jointer , 4 inch, Sears # 38778

If you have in sets, blade and wedge I will

also be interested Sincerely Vern, in

Lake Forest Park, WA

[george campbell]

I have a 315.17380 router and need the slotted lock nut for it that helps hold the cutter in the router. can I get part numbers or a manual. or a place to get these parts?

thanks

[Gene]

Does anyone have a source for a replacement arbor and bearing unit w/key-part no. 38170.

[Lloyd Bright]

I’m looking for a base support assem. #6428 on the parts drawing (they said was unavailable) for the motor on this older Craftsman 10″ table saw, Model #113.27520 Thanks.

[mj hopper]

an old friend of mine gave me this manual drill press but i think it is missing some hold down parts or measure gauges OR SOMETHING.

does anyone have an instruction manual listing the parts or something that may help???

[Jim Barto]

Looking for a pivot arm for Craftsman Miter Box

Model # 881.36306

Pivot Arm part #30610

Any help would be appreciated.

[Lance Hansen]

I am in search of an 11″ blade for a wormdrive skilsaw I acquired recently. It is a model 127. Clearly a vintage piece from the 40’s or 50’s that I am using to cut timbers. The original blade is with it, but I need a new one. Any help out there ?

Thanks

[Lance Hansen]

I recently acquired a Ryobi L580 electric hand planer to plane down the timbers I am cutting from windfall oaks. I found out that this model was discontinued in 1992 and replacement knives are not available from the manufacturer.

Is anyone aware of where I can get new blades that may be on someones shelf – maybe on old hardware store or something or somones unit in their shop.

Thanks

Lance

[Bob Wetmore]

I need a capacitor (10MFD 250VAC). The capacitor just burn out and is not available from Sears as a separate part. I believe it only comes with the motor priced at $185.00. Does anyone know where I can get a replacement capacitor of this rating. All the searching that I have done finds either ratings from 25MFD and higher or much smaller but none in the range I need.

[josh]

Need parts for 1950 manufactured Craftsman 6″ Belt Sander.. The model number is 103.27380. Any ideas of where I could purchase parts for this machine?

Josh

[Esteban Sanchez Perez]

por favor si alguien puede tener el manual de piezas de sierra cortadora de banco craftsman 11329991 podriamos negociar algo

saludos

[Glen King]

I have this old table saw which I inherited from my grandfather. It is a tilting arbor saw, with a heavy cast iron base and top. it has a rack and pinion gear for the blade elevator however the rack and pinion are made from pig iron and the teeth are stripped. The rack has a slight curve in it so my local machine shop say’s he cant replicate it. So no I am in the process of building my own propane fired foundry so that I can hopfully cast the part in brass myself. So far the foundry is going thogether great. should be done with it in a few weeks.

[Gerry]

I am having trouble finding parts for this old jigsaw. I need pushrods, or whatever they are called now, for this vintage jigsaw. Any information would be useful. Thanks, please email me!

[Guilis Aquino]

Looking for a power pak for a CRAFTSMAN 3/8 IN. 2 SPEED CORDLESS DRILL. Model #: 135111201

Cant find it anywhwere. I am looking for the power pak if not a new drill all together.

Thanks.

[Jeff Bryan]

Just bought the 9-inch band saw. However, the rip fence for the 9/11-inch (#24941 Catalog 2002-2003 page 121) is nowhere to be found! Help!

Thanks!!

[Fred Masi]

I am in need of a fence and rail system for craftsman table saw mdl 103.22160.If anyone has one let me know.

Thanks

[Aryeh]

I am missing some of the spring clips that prevent drawers from being pulled out of their guides on 2 Craftsman tool chests. The Sears repair center recognizes them immediately (Oh, yeah, this is from a tool chest, we just ordered some of these for someone) but pulls a face when I tell them there is absolutely no model # anywhere on these chests. Any ideas? As a last resort, really last, I may make some.

Thanks,

Aryeh of the bruised toes.

[Bradley B. Gaines]

Looking for a tailstock assy. for lathe model no.103.23070

[Jim Uhl]

Contrary to what many have told me, this is not a standard hardware store, or garden supply item, that or of all the suppliers I have contacted on ther Internet are for some reason denying this.

I am in need of a 1/2″ V belt drive pulley made for Craftsman by Murray that measures 8 3/8″ (8.4) outside diameter, and has a 3/4″ bore. Preferably with a 3/16″ Woodruf Key slot and 2, 5/16″ set screws, but I can always modify for these.

Thanks,

Jim Uhl

[Corey Cedotal]

I am looking for a Craftsman wood lathe owners manual,model number 113.23801

[Tim]

I sent you a e-mail with the information about my 1950’s craftsman power tool set I have please respond.

[John Wolf]

Has anyone located a source for blades for the Crafstman 4″ jointer? Thanks

[Greg Lawrey]

looking for owners manual,parts list.It is a good old saw,just like to get it in it’s original state.

[Wilbur McLane]

Model number is 20725607 craftman hand power saw

115 A/C 13.8 amps. I need the plastic handle part that bolts to the handle This covers the wires and switch on top of the metal handle.

Saw works good otherwise.

[justin]

i have a black and decker firestorm fs1802 and the variable switch has gone out…..anyone aware of how i can pick one of these up….in texas?

[Neal]

Anyone know oem and when it was sold?

[A. Tryon]

no model # need plastic guide

[S L Mowry]

I am searching for a part for a 1989 Grizzly Jigsaw

it is Part #73616 (upper chuck) for Model #G1535. If anyone knows of a supplier of Grizzly Parts please let me know – Grizzly no longer has this part.

[David Knight]

I have a model 113.29461 bought in 1972. Motor finally gave up. Sears no longer has. Motor is part #63490 120/240 volt. Any thoughts on where to look for motor?? Any help appreciated.

[Calvin Sibley]

I’m looking for parts for a Universal Products, 14″ wd cutting vertical band saw. Specifically need upper and lower tires to fit the 13 5/8″ dia blade wheels. Old rubber appears to be 1″ wide and 1/8″ thick, inset into the wheel. Made need other parts in the future. Haven’t found a source for “Universal Products”, made in Taiwan in 1985.

[Bill Froyen]

I am looking for side extensions for this saw.

Saw table is 20″ long from font to back.

Thanks

[tony salvino]

I’m looking for a used craftsman fence

assy no 62937

[FRED SIMON]

TRIGER SWITCH MODL.315.17280

[barry coster]

i need a 10″ radial saw motor mod# 113-29002

[Jeffrey W. Cullop]

Looking for a owners manual for this vintage table saw. I believe it was new in 1946.

THANKS

[Mike]

Desperate to find a manual for this tool

[Bill Segreaves]

I need to find a schematic or a manul for a sears craftsman chainsaw, vintage 1988 or 87 or89. 18 inch bar. I need to have it rebuilt and need part numbers. Any help would be great. Thanks

[Linnie Burton Angerstein]

I need a new Craftsman( Professional) 1 Hour Charger 9.6 thru 24 Volt

Fast Charger

Dual Charger Rate

Input: 120v AC 60Hz 135 Watts

Output: 9.6-24v DC 3a Battery Charger

use with Battery Pack No. 315. 110300, 315.110310,315.110330, 315.110340, 315.110350,981956. 110310.

Charger No. 315.110400

E116449 7505

I think This is the Serial No. 60038

I want to buy a new Charger Please

[Tess]

I am trying to find a manual for a Sears 4 1/8″ Jointer, Model 149.236221. If anyone has one, or knows a website that contains one, please let me know. Thanks.

[Peggy Foss]

I have been looking for someone i can buy parts, such as the cord that is cracked and worn out on our power tools. I am having a hard time finding a place i can buy them. I can replace the cord myself if i could just find where to get them.

[David Kovachevich]

I need a bearing (Hoover 993L00) for a 1976, 12″ Band Saw Model #113.24350. How do I go about obtaining this.

[Scott Potter]

I am trying to change my saw from 220v to 110v and the diagram on the motor does not make sense with the wires inside… Does anybody have a manual for this saw (113.29510) or have one that is wired now to 110?? I would pay for advice or a manual that has better notes on the wiring hookups.

[Charlie Moe]

Need owners manual for sears wood planer; Model Number: 306.233751

[ERNEST HERNANDEZ]

I NEED 2 COILS FOR 15HP GAMEFISHER OUTBOARD. SEARS MODEL #225581501 PART#12379. WHERE CAN I PURCHASE THESE AND GET PRICES. THANK YOU

[ERNEST HERNANDEZ]

I NEED 2 COILS FOR 15HP GAMEFISHER OUTBOARD. SEARS MODEL #225581501 PART#12379. WHERE CAN I PURCHASE THESE AND GET PRICES. SEARS DOESN’T CARRY THEM ANYMORE

[leslie horton]

I have a Craftsman Router Model No. 315.17370 in which I need 2 parts for it [collet with retaining ring 6-610662-00 ] [Lock Nut1-623793-01] Sure hope someone out there can help me

[Tom Capps]

I am in need of a cylinder and piston ring for a 22 gal oilfree compressor. It’s a craftsman/sears brand. Got any suggestions where these type parts can be found/purchased. Any help is much appreciated.

Regards

Tom

Model #919.165220

Pump # AC-0178

[Don Kaymack]

look for a rubber boot for a 12 5/16 dia. wheel that go on a craftsman band saw

Model 103.0103

[Gary]

I have a crafstman jointer planer model# 10321880 and dont understand how to adjust it. The only adjustment I see is on one side of the table to leval the two halves. There seems no way to make the blades go up and down, once I have the two table halves leval. I tried to use it with the table at different levals but its hard to work with that way and seems improper, thank you, Gary.

[ROXANNE]

NEED OWNER’S MANUAL OR INSTRUCTIONS. HELP !!!

[david saylor]

NEED MAIN DRIVE GEAR FROM MOTOR. ASSEMBLY WILL INCLUDE ARBOR SHAFT, BEARING AND DRIVE GEAR. MOTOR NEED NOT RUN NEED GEAR ONLY.

[Randy Wisniewski]

NEED HANDLE NO LONGER MADE OR WILL SELL THE REST FOR PARTS. THANKS

[Terry J. Yoder]

I need the power switch for a Craftsman Sander-Polisher model 110.7820 The switch is a slider type rated at 3 amp 250 volt or 6 amp at 120 volt. Looks like it was made by Cutler Hammer

[Terry Robbins]

I need an owners/operators manual for a Craftsman Welder. It is a model 113.20241, code C61. It is rated at 20-180 amps and says Simpson-Sears LTD on the front. I have no idea how old it is.

[ctr17615@centurytel.com — – Daniel J Bucheger]

Dear SIR,

I am in dire need of a set of Brushes for my Dads skill saw, he says the only numbers he can find on the saw are this- – 6072 , now I am not sure that is the model no.or what??

Also he needs a new power cord that he accidently cut in half and then cut it again and then again, lots of black eleltricial tape on it, so we need new brushes and a new cord, is there anybody out there that can help me in purchasing such said items, contact me at

ctr17615@centurytel.net.

[Bob Koval]

I need to purchase Part # 30254 SWITCH

for MODEL # 113201471. You ca e-mail me at fiddlers@adelphia.net

[jeff]

Anyone have a fence/rails and table extentions to fit saw? Original preferred. Thanks.

[Art]

Need a motor and manual.

[Stan]

I am looking for a manual or copy for this band saw. King-Seeley manufacture in the 1950’s (?). It won’t keep blades on the wheels and I need to know how to adjust it or see if something is missing. Any info appreciated.

[N. Brohart]

could you tell me what numbers in an Echo chainsaw compares to my Craftsman model 271.358290 , serial # 0006651 craftsman 4.3A/VL

[don stonebridge]

table adjusting dual gear,marked 53416-103

call 631 286-1205

[LARRY]

PLEASE EMAIL ME AT lilbyte@custertel.net if you know where i can find one. thanks

[Tom Williams]

I’m looking for an owners manual for my Craftsman 10/32 Snowblower model # 536 885 010 with tracks. Even a copy would suffice. My email address is willit@optonline.net.

Thanks,

Tom

[Joe Ryan]

I have an old sears saw in the original case, complete with wrenches, owners manual, and grease. The cord does not appear to be the original(part#SR-64). I am wondering where I may purchase this cord from?

[Bill Greene]

I am looking for parts manuel or any information for 5.5 HP/17 Tiller Briggs engine

[terry beezley]

looking for a copy of the operator manuel for the gamefisher autodrive 3.0 hp outboard motor. thanks.

[leocalabro57@msn.com]

model number 106.153540 i need a parts manual

& operators manual

[Mike Ramsey]

Need manual or copy of, to complete collection. Sears does not list item and only has info on items under ten year. Any info would be greatly appriciated.

[Richard Harris]

Looking for parts and repair manual for this saw. Also looking for a source of old Craftsman decals that could be put on the upper wheel cover. Any help would be appreciated. Thank you.

[Bill Matthews]

I recently purchased an old shaper and it is in great condition. It was manufactored by King-Seekey Corp and has the numbers 39211-103, which I think is a model number, and K29. These are stamped into the casting.

I’m looking for any onfo and the manual.

[don preston]

i need a brass sleave for a craftsman pad sander model 315.11650 the sleave is what the brush goes into. please let me know if there is any way i can order one.my e-mail is dpreston200124151@yahoo.com

[Bill]

need owners manual for radial arm saw model 113196300

[Bill]

need owners manual for radial arm saw model 113196300

[Tommy Wyrick]

Looking for the manual, need a guard and a dust bag.

Thanks.

[jerry]

please help me return my sander to working order

flames that shoot out are not good.

thank you

[Randy]

I have an early 80’s chainsaw model 917.353770 and I need a gas cap or oil cap as they are the same size. The part has been discontinued and they do not offer a replacement. Does anyone know where I can get one?

Thanks,

Randy

[John Cunningham]

I recently accquired a Craftsman Bandsaw/ Sander 12 inch. 1/2 HP @1725 RPM. Number stamped on the inside is I.D. #113 24201 and was produced in 12/73.

I need some help in locating a service manual for this Bandsaw. If I can find it on the web then I could print it out. Thanks to anyone who can help.

[Keith]

I currently have a craftsman rear bagger self propelled lawnmower. I like it but do not want to bag anymore. Is there something made that goes on it to make it a side discharge so I don’t have to bag?

[d@zander]

where can i locate the steering top rod for this mower?

[D. Loats]

I need an owners manual for a craftsman power sharp solid state 2.3 16 chain saw–about 20 yrs old

[D. Loats]

I need an owners manual for a craftsman power sharp solid state 2.3 16 chain saw–about 20 yrs old e-maol address DLoats@aol.com

[D. Loats]

I need an owners manual for a craftsman power sharp solid state 2.3 16 chain saw–about 20 yrs old e-mail address DLoats@aol.com

[Bill Matthews]

I recently bought an older shaper manufactored by King-Seeley Corp. Staped on the cast houseing is the following numbers: 39211-103 and K29. Looking for a manual. Unknown how old it is. Good shape.

[carl]

tools with 113.xxx part numbers were manufactured by the ridgid tool division of emerson electric, try calling 1-800-4-RIDGID for assistance with manuals, parts, or questions

[Tim Daugherty]

I have been looking for replacement belts for a craftsman belt sander model 135.277050 The size is 4″ x 21-3/4″. Sears dont make them i dont think. i have part numbers for the paper 28379 medium coarse. and 28380 Coarse can you help Thanks alot

[keith]

I recently bought a model 112 1901 planer. Any idea how old it is and where I can find a manual?

[Tony Feld]

I have had this many years. The switch is broke. Does anyone know where I can get a spare switch. I have tried sears parts and they told me that they are no longer available.

[Darlene]

I need a replacement belt for a Craftsman riding mower.

The model # of the tractor is 131.96600 and the number on the belt is 58963 but I understand there is a new belt #TH510H075.

We are trying to get this old mower to working again.

[John cologne]

I waould like to know what size blade it uses, and if I can still get blades for it.

e-mail jtciii@alltel.net

[Mike]

Hello I need a Magneto, solid state or coil in owners manual they call it the magneto and I went to sears to get one for it but they tell me they no longer have that part. If any one can help me with this Please email me at spon@myshorelink.com or may call me at 410-213-9678 Thank you ! Mike

[Lori]

Hello, Where can I find parts or information for a craftsman 5.5hp high wheel trimmer? I do not have the model number as of yet. but will obtain it shortly. I was just wondering where I might be able to find parts for it,, it is NOt too incredibly old. maybe 2 yrs or so. but sears no longer has this on or aprts for it. surely there has to be somewhere to obtain parts?

Thanks a Bunch for your time in advance,

Lori

[Matt]

I need the plastic housing part # 69069 for this bandsaw , any ideas?

[craftsman chainsaw 2.3ps]

I HAVE BEAN GIVEN A CHAINSAW FROM MY FATHER AND I AM REBUILDING IT WITH MY SON AS A TRAINING LESSON AND I AM IN NEED OF A FEW PARTS I HOPE THAT YOU CAN HELP MODEL NO#358.350862 CRATFSMAN 2.3PS

THANKS DENNIS

[bruce]

Looking for the age of this planer. Got any ideas?

[jon jeeps]

looking for a prop any help.

[Wade]

I’m looking for any infromation I can get

[Doug Woods]

I have acquired an ancient Sears/Craftsman Motorized Scroll Saw, Model – 572,247200 from a garage sale. I am completely unsure of its vintage. The problem is that I cannot change the blade and would like to locate a hand book/owner’s manual for guidance or could someone help me with some straight forward instructions please?

Doug

[mike]

I need a power switch part no 2-616276-01 for a

craftsman belt sander model no 315.22420

[Ann Chamberlain]

We have the saw, frame, belts, but no motor. Anyone know how this thing worked?

[Jim Porter: E-mail jfporter@sesaline.com]

I am in need of power pak #72064 for craftsman drill 3/8 #135111201,bat# 13511121,also can use charger@135111201 ,2610320160(72065)

Jim Porter

email#jfporter@sesaline.com

[Mike]

Hello I am still looking for a coil for a 9.9 sears gamefisher if any one has one please email me at spon@myshorelink.com

[Greg Hayes]

I’m looking for a switch for a model 315.27780 saw this is about 50 years old. greg.hayes@paulinelectric.com

[Joseph F Malta]

I’m looking for a fence extension for my Craftman Miter saw. Ser. # N926120630/

Mod# 315.212100. It’s a 10′ I need a high back fence to miter cut crown moulding.

Thank you!

Joe Malta

[Dennis I: E-mail dennyi@surfpower.net]

Need help locateing brushes for an older Skil Mod. 504 Builder’s Line Skil Saw. This saw has a 4-1/2in. blade.

[gary ketron( connieket@msn.com)]

I have a sears radial arm saw purchased in about 1990-1992, model # 113-197150, serial # 89345.m0715 and I need an owners manual for it. Do you have one or know where I can get one?

[RICK CLARK]

Looking for part for a craftman paint gun number 9.15535. This is NOT an airless sprayer. Gun is around 10 years old. Need an air valve seal.

[mike brogan]

repair parts breakdown for craftsman cordless drill

[antrobus]

If anyone has a good link for old Craftsman parts and manuals, please send it my way! I read through the replies to Charlie Nichols’s 1998 email on this topic, but didn’t see any good conclusion on the subject.

[Unregistered-lawnatlas]

in the late ’40s and early ’50s sears sold about 10 different versions of essentially the same type of machine lathe, most, if not all were made by Atlas (tool works?) Mich. as I understand it the original mfg. has long since gone out of business, however, parts are still available from various sources. there are at least 3-4 that I’m aware of. identifying features include bed length, bearing type (babbit v. roller), swing, main lead screw (5/8″ or 3/4″), and type of feed gear change device (simple on/off lever or quick change).

[Unregistered-dbarry]

I’m looking for an owner or service manual for this machine.

[Unregistered-nickim]

for sears metal cutting band saw model 10122950

[Unregistered-9 Fingers]

Hello, I would like to buy a blade guard for a model # 103.20620 jointer. The part # is 21520. If anyone can help please contact me at john_000_45760@yahoo.com Thanks!

[Unregistered-pavive]

Problems in capacitance measurement, doesn´t work properly. I need, either schematic or any idea to solve my problem.

Thanks in advance
Gus

[Handyman]

Before going any further, find the Model # on your machine or tool.
Then start is the Sears Parts Website:
http://www.partsdirect.com
If that did not work, try calling their parts line.
(800) 469-4663

Still no luck?
Go to:
http://www.owwm.com/Craftsman/Manufacturers-Prefix.asp

Find the manufacturer of your tool. Google the maker to see if they are still in business http://www.google.com and contact them directly.

Still no luck?

My next stop is eBay:
http://www.ebay.com They have a tool section and often you can find the same model of your tool for sale. It does not matter if it works. I have combined several of my old tools to make one working model. That is of course if you are trying to use the tool and not just collect antiques.

Still no luck?

Try local flea markets and garage sales, many will state, “tools” in their ads. This is a last resort and if you have made it this far you may want to look into having your tool serviced by a professional. They may have access to parts that are replacements for your original or they can replace a couple parts down the line and make your tool like new.

Good luck.

Often people ask if Sears or Craftsman manufactures the tools they sell. The answer is simply, no. Sears owns the brand name Craftsman and contracts out the manufacture to tool producers. Sears picks the features they want on their models and specifies the quality specifications. Then brands these tools. Sears may also own some of the patents to produce exclusive tools.

Why should you buy Craftsman?
They are decent tools at a decent price. And they go on sale.
The hand tools also have a great guarantee.
On a side note: I could not figure out why the tool department wanted to fix my ratchet instead of replace it until I got home and the new one did not fit in my plastic case. I should have listened more closely to the teenager behind the counter.

Where did the name Craftsman come from?
This is from the Sears website:
“Historians do know the origin of the Craftsman brand name. In 1927, Sears hired Arthur Barrows to head the company’s Hardware Department. Barrows knew hardware and wanted to create a brand name for Sears hardware that distinguished it from other manufacturers. Barrows liked the name Craftsman used by the Marion-Craftsman Tool Company and offered Marion-Craftsman a reported $500.00 for the rights to use the Craftsman name on Sears products.
“When Sears promoted Barrows to West Coast Manager, he hired Tom Dunlap to take over the hardware department. Dunlap immediately upgraded the quality of the tools. He threw out all the big, clumsy, cheap, cast-iron hammers and wrenches, and the soft screwdrivers that were hangovers from the days when farmers were the company’s biggest customers. Dunlap recognized that America had moved into the automobile age and that Sears needed a line of high quality tools to meet this new demand.
“Tom Dunlap understood the pride a good mechanic had in their tools and how most mechanics meticulously cleaned their tools at the end of each day. He decided to improve the look of Craftsman tools by adding chrome plate to improve the finish, color, and trim on wrenches and sockets, and high impact plastic handles on screwdrivers. Dunlap’s old boss, Arthur Barrows did not think it made sense to chrome plate a tool that someone would “slug the hell out of” when using, but Dunlap’s persistence paid off and sales of chrome plated tools increased six times the next year. Craftsman full polish wrenches quickly became popular with mechanics because they were reliable, looked good, and were easy to clean.”

AMT 5300

AMT 5300 lathe. The only info given was that AMT was not making wood working equipment any longer. That is true but AMT did not make that lathe, it came from China and AMT put their name on it. Les Stewart of Rock Hill, SC found a source for parts for this lathe and “This lathe is an older version of a Harbor Freight model 34706 lathe. The biggest difference is that the HF lathe has the spindles bored for #2 Morse tapers. Other than that it is the same.”

[jdfrisco]

need trigger switch for this saw. have been to sears service center, did not have parts for it. need to know if there is an after market place where i could get these parts. this saw is made of ananized steel and has a very good motor, do not want to get rid of and get new saw.

sincerely,

jim dryden

[Jose11223]

Would like to know if any one has information on this jointer.

thank you

jose

[Unregistered-MANUELET]

IAM LOOKING FOR A 37397 BLADE GAURD FOR A 11329440 MODEL CRAFTMAN 10″ RADIAL ARM SAW

[Unregistered-ken m]

i am in desperate need of chraging stand # 971637-002. can not find it anywhere. any help?

[Unregistered-drbobjr]

I am looking for the drive gear for a saw MN 315.27830. It is 1-5/8 in diameter with a 32DP. Any informantion would be helpful.

[Unregistered-Sharkey]

looking for a copy of the named table saw user manuel. Does anybody know where to get a copy of one???

[Unregistered-jjvandus]

i have a duracraft band saw vs-312, built in 1982, would like to find owners manual and parts. any one know if company or after market is available

[Unregistered-Earl]

I have an older model Craftsman 8 inch table saw. I have used and used it. but today it poped my circuit breaker and refused to run. I was wondering if any one would have a motor for it. The Model is 113-221611. The code date is 88242-M1205

[GECole2]

I am in dire need of a spindle lock lever for the Craftsman Router 315.17370. Any leads or souce would be greatly appreciated.
Best Regards,
George Cole
gcole55@bellsouth.net

[Unregistered-Chris Walsh]

I have a early craftsman drill press for sale. .. intersted parties contact me at memovox2@aol.com – Chris.

[Unregistered-sparty75]

I have one of these lathes and need a new head spindle. Sears never heard of it. It is approx 40 years old. Does anyone have any info?

[Unregistered-J A McClenathan]

I need info regarding proper blade rotating rpm’s and where can I buy new blades (6″ size)?

[Unregistered-Brian]

I am looking for a motor for a 4 1/8″ Craftman joiner/planner model #149.236221. 5.8amp, 120v, 60hz

Thanks

[Unregistered-mrse]

I am looking for a copy of the owner’s manual for a Sears 12 inch band saw Model 113 24290. Can any one please help me out? Thanks. mrse214@webtv.net

[lisi525]

Works like new , thanks to my dad .

[Author]

Posts