Viewing 1 reply thread
  • Author
    Posts
    • #58120
      coylewendy
      Participant

      hi , i have a kenmore washer and i cant wash in cold water or rinse, i have cleaned the hoses and still no cold water but if i disconnect the hose from washer it runs great to a bucket , hot water runs just fine…but i would like to wash in cold water what seems to be the problem. no kinks in hose,the inlet screens are cleaned, but the cold water still wont fill into washer tub. thanks wendy

    • #275128
      DanO
      Participant

      ** i have a kenmore washer **

      Sears has sold many, many different models and designs of Kenmore clothes washers over the years. The only way for us to find out which on your have is if you post its complete model number.

      You can find tips for locating the model and serial number tag on your appliances in the ‘repair Parts’ section of my web site linked below.

      ** i cant wash or rinse in cold water. i have cleaned the hoses and still no cold water but if i disconnect the hose from washer it runs great to a bucket **

      There could be a problem with the cold side of the water fill valve on the washer. It could be plugged internally or just defective. There is also a possibility that the temperature control selector switch could be defective.

      You can read a bit about the water valves used on appliances at the following link:

      – Appliance Water Fill Valve Information
      LINK > http://www.appliance411.com/data.php?info=Water+Valve

      JFYI

      Dan O.
      http://www.Appliance411.com/parts/?ref411=Kenmore+Washer
      The Appliance Information Site
      =D~~~~~~

Viewing 1 reply thread
  • You must be logged in to reply to this topic.