• This topic is empty.
Viewing 2 reply threads
  • Author
    Posts
    • #23810
      Mark
      Guest

      Hi all! I havea couple questions. I have a Janitrol gas space heater hanging from the ceiling in my garage, the problem I’m having is the burner comes on ok, heats up the unit then the fan kicks in for several seconds then kicks off then immediately kicks back on for several seconds then kicks off then immediately comes back on over and over again. Any idea what is wrong? Also any idea where I could get an owners manual for this space heater. Thanks

    • #108532
      Harold Kestenholz – Hydronic Network
      Guest

      There is usually a snap switch near the heat exchanger that permits the fan to come on when the heat exchanger is warm enough. This switch may have changed settings, or the fan is blowing too much air away from the exchanger to keep it warm. Janitrol still exists, so ask them for a manual.

      http://www.janitrol-goodman-gmc.com/

      http://www.furnaceparts.com/furnace_parts.htm#Fan%20&%20Limit%20Controls

    • #165528
      laura ledbetter
      Guest

      my janitrol system will not cool or heat. this went on after a thunderstorm the night before. there is a heting and cooling message in the room temp box and the desired room temp box has the number five in it.

Viewing 2 reply threads
  • You must be logged in to reply to this topic.