• This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • #27516
      Wendy
      Guest

      I am doing over a room in my basement. Presently there is carpet glued to the concrete. What I am thinking of doing is putting down a polyethylene vapour barrior then 2″ styrofoam then tongue and groove plywood over the styrofoam. Any ideas on this plan of attack…….please advise me!!!!

    • #122058
      scott
      Guest

      Hi wendy I would fasten strappping to the concrete floor with concrete nails every 16 inches on center and strapping around the perimeter of the room laying the plywood the long way at right angles to the strapping . 3/4 inch styrofoam between the strapping then glue the 3/4 ” plywood down with pl 400 and use 1 1/4 screws

Viewing 1 reply thread
  • You must be logged in to reply to this topic.