whirlpool washer fix

[piddle]

whirlpool washer and kenmore washers are the same. on these washers it will not spin if the lid switch is out. to check out the lid switch unplug machine.use a scraper or screwdriver between the lid and the bottom of the washer about 1 1/2inches from both corners of the top. push toward back of machine. you take the two wires off the switch and tape them together.try it to see if it spins then get a new switch. if it still don’t work there maybe a wire on the clutch which is inside the bottom back of the washer.it is a black switch with 4 wires