Tommy Mac Discussions › Forums › Fix-it Forum: Home Improvement & Do It Yourself Repair Forum › wiring a gfi › installing the GFCI
September 13, 2004 at 1:03 pm
#251455
doug seibert
Participant
The Ground Fault Circuit Interupter needs to be installed BEFORE the switch…….
Dis-Connect the Black and White cable supplying power to the switches/fan/light…..
And reconnect this to the LINE side of the GFCI…….
Then feed the switched fan/light circuit from the LOAD side of the GFCI……..
Make sure you start with a deep J-box…….