I think so?

[bvalleejr]

Thanks again, I also got an opinion on another forum from a licensed electrician who said this scenario will work fine. I thought of the back feedign scenario issue as well, but in theory after sketching it out, the hots are all connected in line (Parallel?) and are powering the devices through the one hot lead source only.. if you were to draw it out with no switches in the schematic it’s kinda like using several hot leads wires from the same starting hot feed source to power the devices depending on what switch is on. if the double pole is on and the fan switch would be flipped on, yes it would then seem to backfeed through the double pole switch fan connection to the ligh connection, but the hot juice is still flowing to the devices from that same 110 volt feed line so in essence no backfeeding is happening? Does this make sense or am I missign something?